Gallery

Gallery

Wall Art

All Wall Art products are made featuring the END GRAIN of solid hardwoods approx. 1 1/2″ thick. No veneers or inlays were used and no dyes or stains were used. All colors used in each piece represents the natural colors of the wood species used. After the layout of each design is constructed and sanded flat to 120 grit sandpaper, final finishing includes: panel is sanded to 400 grit on all 6 sides; wood grain is filled; 2 sprayed coats of sanding sealer are applied and sanded to flat sheen; 4 sprayed coats of lacquer are applied with light sanding between coats; final coat of lacquer is sanded to flat sheen with 800 grit sandpaper; polish is then applied and buffed to mirror finish. French cleat is attached to back of frame for secure wall mount.

Cutting Boards

All CUTTING BOARDS are made featuring the END GRAIN of solid hardwoods approx. 1 1/2″ thick. No veneers or inlays were used and no dyes or stains were used. All colors shown in each piece represent the natural colors of the wood species used. After the layout of each design is constructed and sanded flat to 320 grit sandpaper, the entire board is completely immersed in a tub of mineral oil for approx. 30 seconds and then allowed to air dry on a rack for 5 hours. It is then immersed a second time briefly in mineral oil and left to air dry. Afterwards, any oil that is not completely absorbed is wiped off with a soft cloth. Rubber feet with a metal washer are screwed on the bottom.

Crosses